PCCU32 Installation and Setup
Key Takeaway
Step-by-step guide to installing PCCU32, creating a device connection, and connecting to an ABB Totalflow via USB, serial, or Ethernet.
Quick Answer
PCCU32 is the configuration and monitoring software for ABB Totalflow devices. Install on Windows, create a device entry matching your Totalflow model, and connect via USB, serial RS-232, or Ethernet (TCP port 10001).
Installation
- Download PCCU32 from ABB's software portal (registration required)
- Run installer as Administrator on Windows 10/11
- Activate license if required for advanced features
Creating a Device Connection
- Launch PCCU32 → Connection Manager
- Add New Device → select device type (XFC, XRC, G4, G5)
- Select communication type (USB, Serial, Ethernet)
- Configure connection parameters
Connection Methods
- USB — Install driver (included), select COM port
- Serial RS-232 — Configure COM port, baud rate (9600/19200)
- Ethernet — Enter IP address, TCP port 10001
First Connection
On successful connection, PCCU32 reads the device identity, firmware version, and application configuration. Verify the displayed information matches the physical device.
Frequently Asked Questions
PCCU32 is available from ABB's portal with registration. Basic configuration capability may be available without charge; advanced features like TAS programming may require additional licensing.
TCP port 10001 by default for Ethernet connections to Totalflow devices.