Tutorials and reference guides for ABB Totalflow flow computers — PCCU32 configuration, AGA-3/7/9 flow measurement, DNP3, Modbus, gas chromatograph integration, and custody transfer for oil and gas pipeline automation.
ABB Totalflow flow computers, including the XSeries XFC and XRC and the G4 and G5 platforms, are used for natural gas measurement, custody transfer, and …
ABB Totalflow is a flow computer and remote automation controller family from ABB for natural gas measurement, custody transfer, and pipeline automation using AGA standards.
Compare ABB Totalflow XFC/XRC and Schneider Electric SCADAPack for oil and gas — flow measurement vs general-purpose RTU, protocols, programming, and custody transfer suitability.
Step-by-step guide to installing PCCU32, creating a device connection, and connecting to an ABB Totalflow via USB, serial, or Ethernet.
How to navigate the PCCU32 interface — device tree, application registers, live data monitor, archive viewer, and configuration tabs.
Complete hardware reference for ABB Totalflow XSeries — XFC and XRC base units, I/O modules, communication ports, power wiring, and field installation.
How to configure analog, digital, pulse, and temperature I/O on ABB Totalflow XSeries devices in PCCU32.
How to configure AGA-3 orifice plate flow measurement on ABB Totalflow XFC — meter tube, orifice plate, inputs, gas composition, compressibility, and archive setup.
How to configure AGA-7 flow measurement for turbine meters on ABB Totalflow — pulse input, K-factor, meter factor, pressure/temperature compensation.
How to configure AGA-9 ultrasonic meter measurement on ABB Totalflow — Modbus integration with meter electronics, diagnostic data, and custody transfer compliance.
How to configure liquid measurement on ABB Totalflow for crude oil and NGL using API MPMS standards — turbine/Coriolis inputs, temperature/density compensation, and VCF calculation.
How to scale analog inputs on ABB Totalflow — raw-to-EU conversion, 4-20mA scaling, wire break detection, and calibration verification.
How to configure ABB Totalflow as a DNP3 Level 2 outstation — device addressing, data object mapping, unsolicited responses, event classes, and SCADA integration.
How to configure Modbus RTU and TCP on ABB Totalflow — master for GC/instrument polling, slave for SCADA access, and register mapping.
How to integrate a gas chromatograph with ABB Totalflow via Modbus for live gas composition in AGA flow calculations — improving custody transfer accuracy.
How to configure, view, and export data archives and flow reports on ABB Totalflow — hourly, daily, event records, contract hours, and custody transfer reporting.
How to configure ABB Totalflow communication options — serial, Ethernet, radio, cellular, and satellite for remote oilfield and pipeline SCADA.
How to use TAS to create custom control programs on ABB Totalflow XRC and G5 — function block diagram, ladder logic, PID control, and field …
How to diagnose ABB Totalflow faults — measurement alarms, communication failures, archive gaps, power issues, and PCCU32 diagnostic tools.
Our engineers have decades of hands-on experience. Let's discuss your project.
Contact NFM Consulting