ACSELERATOR RTAC Installation and First Connection
Key Takeaway
How to install ACSELERATOR RTAC (SEL-5033), create a new RTAC project, and connect to an SEL-3530 or SEL-3555 over Ethernet or serial.
Quick Answer
ACSELERATOR RTAC (SEL-5033) is downloadable from selinc.com with a free SEL account. Install on Windows, create a project matching your RTAC hardware model and firmware, and connect via Ethernet or front panel serial port to deploy.
vs ACSELERATOR Quickset
Quickset configures individual SEL relays. ACSELERATOR RTAC configures the RTAC controller — tag database, protocol drivers, IEC 61131-3 programs, and HMI pages. Different tools for different purposes.
Installation
- Download from selinc.com (free SEL account required)
- Install on Windows 10/11
- Runtime licenses included with RTAC hardware purchase
New Project
- Select hardware model (SEL-3530, SEL-3354, SEL-3555)
- Select firmware version (must match physical hardware)
- Name project and save
Connecting
- Ethernet — RTAC IP address, default port
- Serial — Front panel F port, serial cable
Deploying
Deploy sends the complete project to the RTAC. Communication may briefly interrupt during deploy. Check deploy log for errors.
Frequently Asked Questions
Downloadable with a free SEL account. Runtime licenses are included with RTAC hardware purchase.
Factory default varies by model and firmware — check the instruction manual. Use direct Ethernet or front serial port for initial connection.
The complete project is sent to the RTAC. Services restart, communication briefly interrupts. The deploy log shows success or errors.