Telepace Studio Interface Overview
Key Takeaway
How to navigate the Telepace Studio interface — project tree, program editor, I/O configuration, data monitor, and communication settings.
Quick Answer
Telepace Studio's interface consists of a project tree for hardware and program organization, program editors for IEC 61131-3 languages, an I/O map for address assignment, a data monitor for live value inspection, and communication configuration panels for DNP3 and Modbus.
Project Tree
The project tree organizes hardware configuration, programs (ladder, ST, FBD, SFC), I/O mapping, communication settings (DNP3, Modbus), and data logging configuration.
Program Editor
Switch between ladder diagram, structured text, and function block diagram editors. Each program organization unit (POU) can use a different language within the same project.
Data Monitor
Read live register values, I/O states, timer/counter values while connected online. Write values directly for testing. Force I/O states for commissioning.
Communication Settings
Configure DNP3 outstation parameters, Modbus master/slave settings, and serial/Ethernet port assignments from the Communications section of the project tree.
Need help with scada & programming?
Texas-based licensed engineers — get a free, no-obligation assessment.
Frequently Asked Questions
Yes. The data monitor reads live values from SCADAPack registers and I/O while connected online, and allows direct value writes and I/O forcing.
Under the Communications section of the project tree — including device address, unsolicited response settings, and class assignment.
Still have questions about your setup? Talk to an engineer or call (210) 405-4248.